Engineering, specialist execution and material supply.
Delivered together as a full EPCC contract, or engaged individually against your own engineering and scope.
Engineering, Procurement, Construction & Commissioning
Complete project delivery under one contract, led by multidiscipline engineering for oil and gas facilities onshore and offshore.
Concepts become safe, buildable, code-compliant designs — from feasibility and front-end studies through detailed design to brownfield modifications. The same team then carries the project through procurement, construction and commissioning, so nothing is lost between disciplines — or can be engaged for the engineering phase alone.

- Structural, mechanical and piping engineering and design
- Process and facilities engineering support
- Pipeline and pipework; tanks and pressure vessels
- Stress analysis and finite element analysis (FEA)
- Brownfield modifications, revamps and de-bottlenecking
- Onshore plant and offshore structures
- Feasibility, front-end and detailed design, with fabrication and construction support
Carbon steel and alloy piping systems — piping and stress engineering, spooling and fabrication, welding, installation, hydrotest and commissioning.
Non-metallic systems are delivered alongside carbon-steel and lined pipework under one contract, from design to hydrotest and handover. The right material and system are specified before a single component is procured.
- GRE — glass reinforced epoxy
- GRP — glass reinforced plastic
- GRVE — glass reinforced vinyl ester
- FRP — fibre reinforced polymer
- RTP — reinforced thermoplastic pipe
- HDPE and MDPE
- UPVC-GRVE dual laminate
- CPVC-GRVE dual laminate
Metallic & Non-Metallic Piping Systems
Complete piping systems for new-build and replacement projects — delivered as full EPCC with one point of accountability, or installed as specialised construction to the client's design.
Specialist engineering is the technical core of this service: the right material and system are specified before a single component is procured. Non-metallic systems — GRE, GRP, GRVE, FRP, RTP, HDPE, MDPE, UPVC-GRVE and CPVC-GRVE (Dual Lamination System) — are delivered alongside carbon-steel and lined pipework under one contract, from design to hydrotest and handover.
Specialist engineering
- Piping and structural design — metallic and non-metallic
- Material selection, specification and technical consultancy
- Corrosion assessment and mitigation strategy
- Integrity and fitness-for-service support
- Stress and support design
How it is delivered

System design
Specification, routing and stress analysis.
Material supply
Certified pipe, fittings and accessories.
Spooling and fabrication
Fabrication, welding and lamination to procedure.
Installation
Trained applicators and site supervision.
Testing and commissioning
Hydrotest, inspection and handover.
Specialist execution, to your engineering.
Delivered on their own, to the client's scope — without the full EPCC contract.

Engineered Composite Repair
One of the most cost-effective ways to restore the strength and integrity of corroded or damaged assets — often without shutdown, hot work or full replacement.
ECR systems are delivered as complete EPCC projects, or as specialised construction to the client's engineering — certified to ISO 24817:2017 and ISO 14692-1:2017 under an ISO 9001:2015 quality system. Every repair begins with engineering — defect assessment, design calculation and material selection — so the system installed is exactly the system the asset needs.
Applications
- Corroded and damaged pipelines
- Pipe supports and structural reinforcement
- Tanks, vessels and pressure equipment
- Bends, tees, flanges and complex geometries
- Reinforcement of live systems, where applicable
Repair systems
GRE · GRVE · GRP · FRP laminates, selected and designed to ISO 24817 for each defect.
Engineering
Defect assessment, repair design to ISO 24817, material selection.
Procurement
Qualified composite systems, fully traceable.
Construction
Surface preparation, application, cure and inspection to procedure.
Commissioning
Inspection records and handover.
Preheating / Induction Heating
Thermocouple-controlled induction pre-heating — heats steel directly and rapidly, with no open flame.
Induction heating is available for welding and heat-treatment applications across oil and gas construction, fabrication and maintenance — delivering faster, cleaner and more precisely controlled heat than conventional gas or resistance methods, with no flame on site.
Why induction
Heats the steel directly, not the air around it.
No flame, no combustion gases, no hot-work permit for the heat source.
Precise, uniform and repeatable temperature control.

- Pre-heating before welding of pipelines, pipe spools, vessels and structural steel
- Post-weld heat treatment (PWHT) and stress relieving
- Interpass temperature maintenance during welding
- Hydrogen bake-out and moisture removal
- Shrink fitting, bolt heating and controlled expansion
- Coating removal, curing and drying support
- Heating for pipe bending and forming
Rubber & HDPE Lining
Corrosion- and abrasion-resistant linings that let conventional steel pipework, spools, tanks and vessels handle aggressive service.
Natural rubber and HDPE linings are applied to procedure by trained applicators and inspected before release — extending the service life of new and existing equipment at a fraction of the cost of exotic alloys. Lining is available as a stand-alone service, or as part of a piping or repair EPCC package.
Applications
- Flanged spools and fabricated pipework
- Tanks, vessels and process equipment
- Seawater, firewater and produced-water systems
- Slurry, chemical and abrasive service
Delivered with
- Surface preparation to specification
- Lining application and cure to procedure
- Spark, thickness and adhesion testing
- Inspection records and handover documentation
Material Supply
Materials and products for operators, contractors and fabricators — sourced from qualified manufacturers and delivered to the required specification and certification.
A demand-driven, deliberately open-ended supply capability: whatever material or product an oil and gas operation requires can be procured to specification, on schedule and from qualified, reputable suppliers — backed by the same engineering judgement that goes into every Civex Solutions Sdn Bhd project.

- GRE, GRP, GRVE, FRP, RTP, HDPE, MDPE, UPVC-GRVE and CPVC-GRVE pipes, fittings and accessories
- Lamination materials and consumables
- Rubber and HDPE lining products
- Composite repair systems and associated materials
- Pipes, fittings, flanges and valves — metallic and non-metallic
- Gaskets, fasteners and sealing products
- Structural steel and fabricated items
- Mechanical, piping and welding consumables
- Coatings, linings and corrosion-protection products
- Instrumentation, MRO items, safety equipment and PPE

Tell us what the asset requires.
Send us a scope, a drawing or a photograph of the defect, and we will return an engineered option.